Mt-1200X Stationary Valve Components Grinding Bench
| US$2,000.00 | 1 Set (MOQ) |
Port:
Tianjin, China
Production Capacity:
300sets Per Month
Payment Terms:
T/T
Benefit All Imp & Exp Co., Ltd
Hebei, China
Last Login Date:
Aug 18, 2025
Main Products:
Portable Valve Grinding Machine, Stationery Valves Grinding Machine, Valve Pressure Test Bench, Pipes Beveling&Cutting Machine, Milling Type Plate Beveling Machine
Find Similar Products
Product Description
Company Info
Basic Info.
Model NO.
MT-800X, MT-1200X
Type
Bench Grinder
Power Source
Electricity
Disc(Wheel) Type
Grinding Disc
Material
Aluminum Alloy
Variable Speed
With Variable Speed
HS Code
84604020
Product Description
Valve Grinding Bench for Grinding valve cores
Table structure valve grinding machine is suitable for the relief valve off site repairing, widely applied in coal-fired power petrochemical steel metallurgical paper and other industries
- Product overview
Stationary valve grinding machine is suitable for the valve disks of gate valves and globe valves,it is widely applied in coal-fired power petrochemical steel metallurgical paper and other industries
Feature:
1,Stationary, more stable and durable
2,Easy to operate, higher efficiency
- Technical parameters
| Item | MT-800X | MT-1200X |
| Grinding Range(mm) | DN100-500mm | DN300-800mm |
| Suitable Valve | Valve disc of Plane globe valve, gate valve, Relief valve | Valve disc of Plane globe valve, gate valve, Relief valve |
| Voltage(V) | 380 | 380 |
| Power(KW) | 1.5 | 2.2 |
| Frequency(HZ) | 50 | 50 |
| Adjust Speed | Frequency conversion and stepless speed regulation | Frequency conversion and stepless speed regulation |
| The Dia of Grinding plate | Dia 800mm | Dia 1200mm |
Preoperational check
a) Clean grinding disc before set the grinding paper
b) Before switch on, grinding disc should be on the grinding surface, the pressure not be hard,, then turn the disc by hand, listen the voice to make sure it is normal, switch on the motor and adjust the pressure to the best area by the handle.
c) Grinding surface should be leveled to make sure there is no sharp stuff can affect grinding angle d) Add enough lubricating oil
Lifting box twice per shift(20# engine oil).
Main shaft transmission once a month(20# engine oil).
Pillar rocker arm rails, lifting screw,nut, rack, sleeve several times per shift(40# engine oil).
Operation
1,Connected power supply, switch on and have a check to make sure it can works well. Swing arm can be adjusted by motor lifting and down, spindle center position can be changed by handle adjustment.
2,Place the valve on workbench, screw firmly, choose appropriate grinding disc installed on the grinding seat, stick grinding paper.
3,Switch on lifting motor and down the swing arm to a suitable location. Push the swing arm, move the spindle box, make sure grinding disc face the valve sealing surface, swing arm to the appropriate position, locking swing arm and spindle box.
4,,,,,.
5,Run at the lowest speed at first, increase to proper speed unless it works well, then switch on motor and start grinding the surface as your requirements.
:1,Must stop grinding when speed changes
2,The parts should be carefully cleaned after use, and remove the grinding paper (cloth), put all parts back to case after smearing oil.
Grinding Process:
1.Rough grinding:
Take grinding paper 60#-120# dry grinding or emery grinding 2.Smooth grinding:
Take grinding paper 240# dry grinding to polishing
3.Fine Grinding:
Fine grinding by grinding paper 400# min
Warning: Do not add water when grinding by grinding paper(cloth)
Send your message to this supplier
People who liked this also liked
US$10,000.00-16,000.00
1 Piece (MOQ)
US$5,000.00-18,000.00
1 Piece (MOQ)
US$750,000.00
1 sets (MOQ)
US$20,000.00-50,000.00
1 Piece (MOQ)
US$40,000.00-50,000.00
1 Set (MOQ)
US$25,600.00-34,800.00
1 Piece (MOQ)
US$11,000.00-19,000.00
1 Set (MOQ)
US$755.00-2,403.00
1 Piece (MOQ)
US$8,000.00-18,500.00
1 Set (MOQ)
